This unit is an advanced detector.
It can detect and locate metal, AC voltage and stud.
In addition. It can be used in construction, fitment, etc.
It can be used to detect and locate stud,metal and ac voltage.
User can detect any material before drilling,cutting,or nailing with this handy auto calibrated detector.
Find the stud center
Find wood and metal studs
AC scanning to trace hot wire
Metal scanning for finding nail, pipe, rebar, and other hidden metallic object.
Auto power off
This unit can be used when you want to do the following items: Hang mirror, picture, cabinet, and shelves securely.
Install grab bar, ceiling fan and chandelier.
Find metallic pipes in concrete.
Find electrical box, exhaust vent, conduit, rebar and ducting.
Trace hot wires behind ceiling, floor and wall.
Stud mode Wood stud of 30*30mm:≤18mm
Metal mode Iron pipe of 25mm:≤30mm
Voltage mode Typical depth of 50mm for 90 to 250V at 50 to 60Hz.
Operation condition -7 to 40℃ below 75% RH
Storage condition -20 to 50℃ below 85% RH
PLEASE NOTE: Detection depth and edge detection can vary due to moisture content of materials, wall texture, paint, etc.
The TS79 works best on sheetrock walls and plank wall. It’s not suitable for plaster walls and concrete walls.